MINNESOTA CONCRETE FLOOR COATINGS

Common Concrete Problems in Minneapolis that Polishing Concrete Solves

If you own a warehouse, factory, or another facility in Minneapolis or St. Paul and you are noticing some issues with your concrete floors, then you are probably a candidate for having your floors polished.

Concrete polishing in Minneapolis is quite common because it preserves concrete so that a facility can get the most out of it for as long as possible. It looks nice, different colors can be chosen, and it doesn’t take long before the floor is ready for use.

So how do you know that it is time for polished concrete?

The answer is to evaluate the condition of your concrete now so you can see what sorts of problems are occurring. At times, the impulse can be to replace the concrete when, in all reality, all you need to do is have it repaired and polished. Here are some common concrete problems that you may observe:

  • Discoloration – Discoloration of concrete is very common, but it shouldn’t happen unless there are missteps made during the pouring process. The concrete is supposed to have a consistent color when it is poured. Discoloration can occur when a contractor may add a little water to the mix and it occurs when calcium chloride is added. With concrete polishing, you can have your concrete colored to a color that better matches the architecture of the building.
  • Scaling – This is another common issue. Scaling occurs if the surface of the concrete peels or breaks off gradually. This is caused when the strength of the concrete is not adequate or the proper curing procedure wasn’t followed. If water seeps into the pours of concrete, it may become more susceptible to the freeze-thaw cycle
  • Cracking – Anyone who has any kind of experience with concrete knows that it is going to crack easily. There are a number of reasons why cracking occurs, such as shrinkage from heat contraction, drying, and subgrade settlement. The weight of the loads that are applied to the concrete can also cause it to crack. To keep concrete from cracking, the soil underneath the slab has to be compacted. The subgrade should also be sloped so it can drain properly.

Concrete polishing has benefitted many businesses throughout Minneapolis and St. Paul because the coating that is applied strengthens the concrete. Before the coating is applied, however, the concrete has to be repaired. It doesn’t have to be replaced unless it is beyond repair and, in many cases, it is not beyond repair. This results in a floor that lasts much longer. You get more out of your initial investment. This creates a return on the investment since concrete polishing is not as expensive as having your old floor torn out and a new one put in.

You can even have a different style of floor. It is concrete, but it can look fantastic while requiring maintenance that is less frequent and requires less effort. This allows it to pay off in a number of ways.